Transfer waterslide paper.
5 sheets - 50x70cm - 170gsm
Directions of use:
The drawing is made with lithographic crayons or with tusche diluted by solvents (no water-based material because it will disolve the gum layer on the paper.)
Place a finely grained stone (or plate) on the press bed and adjust the pressure for normal printing less something like 1/2 turn.
Dampen equally the entire surface of the stone.
Place the transfer paper on the stone, a backing sheet, the tympan and run it through the press.
Add 1/4 turn pressure and run it through the press again.Wet the back of the transfer paper, add 1/4 turn pressure and run it through the press twice.
Re-wet the back of the paper and run it through the press two times (or more if there is any doubt).
Generously wet the back of the transfer paper, wait a couple of minutes and gently peel off the backing of the transfer paper.
Let the drawing sit overnight.
Talc and etch the stone.